Inlet Strainer 1/2" Barb

Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.

Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap.

Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.

Maximum Flow Rates:

• With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
• With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
• With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
• Maximum Water Temperature: 160F (70C)
• Maximum Pressure: 70 PSI (5 bar)

The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.