Slow Hardener for Gal

206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.

• Pot life at 72°F (22°C): 20 to 25 minutes
• Cure to a solid state: 10 to 15 hours
• Cure to maximum strength: 1 to 4 days
• Minimum recommended temperature: 60°F (16°C)